Montana Varnish Spray 400ml

Description

MONTANA VARNISH SPRAY

• Lacquer Base: NC-Acrylic
• Gloss Level: Matte, Gloss, Semi Gloss
• Valve System: Low-Pressure
• Content: 400ml

Acid-free, quick drying, clear varnish made of acrylic base. No yellowing or de-saturation. For interior and exterior use. Can be used for art, hobby, crafts and DIY. Available in gloss, semi-gloss, matte finish. Gloss level shown on donut (see top of can). Protects and fixes paint on surfaces like canvas, paper, charcoal drawing, bast fibre, wood, photos, etc. Protects against oxidation and UV light. The more coats applied, the stronger the UV protection. During application, protect the object and the surrounding area from spray. Surfaces should be dry, clean of dust, oils and rust before applying the varnish.

Shake can well for 2-3 minutes upside down to take advantage of gravity. Remove the safety ring by removing the nozzle and turning the can upside down allowing it to fall out. Then re-apply the nozzle. Apply varnish in several thin layers, spraying before the previous coat is fully dry but with 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate. For optimal lifespan, always store cans with the nozzle on. NOT COMPATIBLE WITH SYNTHETIC BASE LACQUERS. Always test spray on a non-visible area to check compatibility of lacquer or paint.

IMPORTANT: AEROSOL spray cans, due to Australian Post Regulation, are classified as dangerous goods and must always travel by road only – overnight trucks (cannot be sent by air). This means that even if you choose the Express shipping they won’t be delivered the next business day.

Montana Varnish Spray